750-315 / 300-000 Wago Coupler for use with I/O Modules

Wago MODBUS Fieldbus Coupler_x000D_ The Wago Modbus Fieldbus coupler, RS 485/1,2 - 115,2k Baud allows connection of the WAGO-I/O-SYSTEM as a slave to the MODBUS or Fieldbus. It recognizes all the connected I/O modules and creates a local process image on this basis. Analogue and speciality module data is sent via words and/or bytes, digital data is sent bit by bit. It allows the storage of the process image in the corresponding Master control (PLC, PC or NC)._x000D_ Couplers series 750 Wago I/O system_x000D_ Range of couplers for analogue and digital signals_x000D_ Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus_x000D_ Configuration simplified with switches or rotary encoders_x000D_ The joint should be connected to the end of the loop, to guarantee the correct transmission of the data and enable the whole assembly to function correctly_x000D_ Wago I/O system range_x000D_ Remote I/O modular system for all functions_x000D_ Makes it easier to connect all I/Os thanks to its cage clamp system_x000D_ Communication with PC, PLCs because of the various communication protocols_x000D_ Colour codes according to the type of signal_x000D_ Features and Benefits_x000D_ DIN 35 rail, cage clamp connection_x000D_ Maximum number of I/O modules is 64_x000D_ DIP switch and 2 decimal coder configuration_x000D_ Voltage supply is 24VDC_x000D_ Input current maximum is 500mA at 24V_x000D_ Isolation is 500V system/supply_x000D_ Operating temperature ranges between 0°C and 55°C_x000D_ Certifications_x000D_ IP20 rated_x000D_ CE EN 50082-2 (1996), EN 50081-1 (1993)_x000D_ cULus approved_x000D_ IEC 60068-2-6_x000D_ IEC 60068-2-27