MTN/1185CQ-25 Monitran Vibration Sensor, 20 mA Max, -25°C → +90°C

MTN1185 Series 4-20mA Accelerometer_x000D_ Used for air handling units, building services, fans_x000D_ 4-20mA output for PLC interface_x000D_ Output proportional to RMS velocity (mm/s)_x000D_ Available with 0-10mm/s (533-2368) or 0-25mm/s (533-2374) velocity ranges_x000D_ Frequency from 2 Hz to 1 kHz_x000D_ Dynamic range: 50 g peak_x000D_ 5 meter armoured PTFE cable_x000D_ IP 67 Stainless Steel body Case_x000D_ To use with Glue or M8 Mounting stud_x000D_ Dimensions (DxL): 27 x 43 mm_x000D_ Accelerometers_x000D_ Vibration sensors use solid-state piezoelectric accelerometers to detect the level of vibration in rotating elements like bearings and gearboxes on machinery such as motors, generators, pumps, fans and compressors. Regular vibration measurements on all critical machines as part of the maintenance regime can detect early signs of failure and provide a way to eliminate these problems. Bearing wear, poor balance and loose mounting all lead to the failure of rotating machinery. Unexpected machinery failure leads to unplanned maintenance costs, loss of production plus potential Health and Safety hazards. They are rugged, adaptable to all types of machinery and conditions including operation in hazardous areas, easy to install and require no maintenance. Used in conjunction with off- and on-line vibration analysers they yield valuable diagnostic information on the machinery's condition and reveal where and when failure may occur allowing pre-emptive maintenance intervention. The dc (velocity) outputs integrate this complex signal into a simple dc signal of 4-20mA proportional to the overall vibration of the machine, ideal for monitoring with all types of industrial controllers.