EM174 Electromen OY DC Motor Controller, 12 → 32 V dc, 8 A, 40 V

PWM DC 8A 12-32Vdc_x000D_ EM-174 motor drive is designed for DC-motor speed control. The unit regulates motor voltage so a non regulated supply voltage is suitable. Potentiometer or direct voltage signal can be used to give the speed control value. Rotation direction changes when control input value turns negative or if control input signal is applied to direction input.The unit has reference positive and negative signal for potentiometer use, i.e. the potentiometer can also be used to drive in both directions, the motor stops at potentiometer middle position. Set value range can be scaled to range trim.,During a direction change, the controller waits for motor to stop before driving in opposite direction. This avoids current peaks at direction change. The current limit can be set with a pot or direct voltage signal to protect the motor and mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V supply use._x000D_ Bi-directional_x000D_ No brake_x000D_ Controlled direction change +/-10v or 0-10v_x000D_ Soft start ramp_x000D_ Adjustable current limit_x000D_ Load compensation (IR comp)_x000D_ Electromen - EM-174 8A 12-32VDC PWM DC DRIVE BOARD_x000D_ The EM-174A motor driver is designed for DC-motor speed control and is suitable for 12 or 24V supply. Control can be provide by a potentiometer or direct voltage signal and the drive has adjustable load compensation, if required.The drive has positive and negative potentiometer input to allow proportional control in both directions, the value range can be scaled with trim pot.On direction change command, the controller waits for motor to stop before driving in reverse, this avoids high in-rush currents at direction change. The current limit can be set with by trim or with a direct voltage signal to protect the motor and mechanism in jam situations._x000D_ Start-up speed can be adjusted with a acceleration ramp, this is adjusted with on board trim pot._x000D_ Features and Benefits_x000D_ High efficiency solid state power stage_x000D_ Bidirectional control with smooth direction change_x000D_ ±10 V or 0-10V control_x000D_ Soft start ramp_x000D_ Adjustable current limit_x000D_ Load compensation_x000D_ High peak loading handling_x000D_ DIN rail mountable_x000D_ 12-24Vdc, 8A continuous, 12A peak_x000D_ Speed and direction control_x000D_ Adjustable start ramp and current limit_x000D_ Symmetrical control ±5V (rev-stop-fwd)_x000D_ Compact and DIN rail mountable