EM-206 Electromen OY DC Motor Controller, 12 → 36 V dc, 10 A, 12 V dc, 24 V dc

EM-206 Brushless Motor Controller_x000D_ EM-206 is a DC-motor controller that is designed for brushless motors with hall sensor feedback. The unit has a mosfet-type high efficiency power stage. The unit is equipped with standard controls, such as speed, stop, reversing and braking._x000D_ Three phase output_x000D_ Continuous speed adjustment_x000D_ Reversing_x000D_ Braking_x000D_ Hall sensor supply and input_x000D_ 60º or 120º commutation_x000D_ Settable / controllable current limit_x000D_ Fault output_x000D_ Open or closed loop activity_x000D_ High efficiency_x000D_ Rail base mountable_x000D_ Electromen - EM-206 BLDC MOTOR CONTROLLER 12-36 V DC, 10A_x000D_ The EM-206 is a DC-motor controller designed for brushless motors with hall sensor feedback (60º or 120º commutation).High efficiency is achieved by using a MOSFET power stage and RF emissions are very low._x000D_ The unit is allows control of speed, direction and braking, speed control is set using external inputs or the on board trim pots_x000D_ There are open and closed loop control modes - open loop (direct control) sets the motor voltage proportional to the control voltage and closed loop mode uses hall sensor feedback for more accurate speed control_x000D_ Current limit restricts motor torque when motor current exceeds the set value, this can be adjusted with trim pot or with an external signal_x000D_ Fault output indicates current limit, under voltage and sensor faults_x000D_ The optional EM-A1 expansion card can be installed to provide symmetrical control with the an external ±10V signal_x000D_ Features and Benefits_x000D_ Three phase output_x000D_ Highly efficient with very low EMC emissions_x000D_ Continuous speed adjustment_x000D_ Reversing and braking control_x000D_ Symmetrical control (rev-stop-fwd) option ±10V_x000D_ Fault output_x000D_ Open/closed loop modes_x000D_ DIN rail mountable_x000D_ 12-36Vdc, 10A continuous, 15A peak_x000D_ Open & closed loop control operation with hall sensor feedback_x000D_ Speed, direction, current limiting, soft start/stop and braking control_x000D_ Compact and DIN rail mountable_x000D_ Symmetrical control (rev-stop-fwd) can be achieved with EM-A1 card option_x000D_ DC Drives - Brushless