EM-324C Electromen OY DC Motor Controller, 10 → 35 V, 4 A, 35 V

Electromen - EM-324C DC Motor 2Q Drive 12-24 V DC, 4 A_x000D_ The EM-324C is a full bridge brushed DC motor drive, the solid state power stage operates with high efficiency using FET-transistors._x000D_ The drive has adjustable acceleration and deceleration ramps facilitating smooth starts and stops._x000D_ Adjustable current limit protects motor against overcurrent situations and it can also be used as an end-stop on current trip._x000D_ Control inputs are present for basic forward, backward and stop commands, as well as limit switch inputs to define end stops._x000D_ This device has also two settable speeds, this can be activated by dedicated input. The same input can be used for analogue speed control signal 0-5V._x000D_ Fault output will indicate a current trip situation, it can also be used to shut the down drive with an external signal, if so desired._x000D_ There are two selectable control modes, in continuous mode the motor runs as long as the control is active, in impulse mode it will operate from a momentary command._x000D_ Special settings are also available for start-up kick and auto reverse._x000D_ For parameters setting there are 3 options: EM-236 interface unit, EM-268 with EmenTool-Lite PC-program and EM-326 with EmenTool-App application for smartphone._x000D_ Features and Benefits_x000D_ Compact with high current output_x000D_ Suits 5-50w motor_x000D_ Current limit 0.1-20A (30A at start up)_x000D_ Zero current limit_x000D_ Overvoltage brake_x000D_ Speed setting_x000D_ Flexible control inputs_x000D_ Impulse / continuous mode_x000D_ DIN rail mountable_x000D_ Programmable parameters to suit application_x000D_ DIN rail mountable_x000D_ 2kHz / 16kHz PWM frequency_x000D_ Molex connector option available