FLG2-20012011 Sick Through-Beam Light Grid FLG Series

Overview_x000D_ At a glance_x000D_ Your Benefit_x000D_ The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts. The complicated individual adjustment of sender and receiver is now longer necessary. In dynamic operating mode, the FLG performs reject and removal control of workpieces in pressing and punching machines and also supports the packaging process. In static operating mode, it can be used for monitoring thread breakage. With a monitored area of 200 mm x 250 mm or 200 mm x 120 mm, it allows detection of small parts down to minimum dimensions of 2 mm over a large area._x000D_ Applications_x000D_ Simple installation and alignment, as sender and receiver in one housing_x000D_ The adjustable pushbutton lock protects against unwanted changes to parameters and manipulation during operation_x000D_ Due to pulse stretching, the output signal is available longer on the control system_x000D_ Also available as an open version for simple integration into your application environment_x000D_ Large monitored area, therefore only one device required for monitoring small and large parts_x000D_ Using the sensitivity adjustment, it is possible to hide falling chips and only recognize objects that are relevant to your detectionDynamic or static operating mode, switchable_x000D_ Forked- or frame-shaped housing, easy alignment_x000D_ Adjustable sensitivity_x000D_ Adjustable pushbutton lock_x000D_ Rugged metal housing_x000D_ Adjustable pulse lengthening_x000D_ Can be switched between Q and Qnot outputs_x000D_ Very fast response time_x000D_ Note_x000D_ Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.