XPSMCTC32 Schneider Electric Safety Controller

XPS MC, Configurable Safety Controllers, Base Units_x000D_ Configurable device capable of centralised monitoring of multiple safety functions such as E-stops, safety interlocks, magnetic safety interlocks, two hand controllers, light curtains, zero speed detection, enabling switches. Designed to provide a solution for safety applications requiring conformity to category 4 of standard EN 954-1/ISO 13849-1 and SIL 3 requirements of standard IEC 61508. Incorporates an interface for communicating with operator dialogue terminals (Magelis) or PLCs._x000D_ 8 control inputs as standard_x000D_ LEDs on the front face enable simple and visual diagnostics_x000D_ Communication via Modbus_x000D_ 30 certified safety functions can be assigned to the safety outputs, these are configured using the XPS MCWIN software (see stock no 464-899)_x000D_ Required safety function can be selected after receipt of the product._x000D_ Note_x000D_ Stock numbers 464-946 and 464-930 are starter kits. These contain the safety controller, XPS-MCWIN configuration software, USB to 8 pin male connector cable, 8 pin female mini DIN to RJ45 cable, sub 25 way male connector to RJ45 cable, cage clamp terminal set and screw clamp terminal set_x000D_ To connect XPS-MC to a PC for programming and diagnostic purposes:_x000D_ Laptop PC with 9 pin serial port: use RS 382-2645 and 544-490_x000D_ Laptop PC with USB port: use RS 464-962 and RS 218-080