XBTZ9782 Schneider Electric Cable 10m For Use With HMI XBTRT511

XBTR-T511_x000D_ Diagnostics with tri-colour backlight (Red, Green and Orange), alarm LED, buzzer and status LEDs on keys_x000D_ Separate 24Vdc input_x000D_ Programmable via Vijeo Lite software (517-397)_x000D_ Connectivity with multipoint Unitelway & Modbus, third party drivers for Mitsubishi, Omron, Rockwell, and Siemens PLCs, and a second serial port for printer connection_x000D_ User configurable membrane keys_x000D_ Pixel graphics with extensive symbols library_x000D_ Bargraphs, gauges, trend graphs, bitmaps_x000D_ Text scrolling_x000D_ Up to 16mm high characters, easy to read_x000D_ Up to 10 lines of 33 characters per screen_x000D_ Touchgrid on screen 11 x 5 cells_x000D_ Same cut-out as text terminal XBTR_x000D_ Patented sprung-loaded fixing clips speed up installation & maintain integrity of IP65 seal_x000D_ Global certifications, including ATEX Zones 2 & 22_x000D_ Note_x000D_ To program XBTRT511 use Vijeo Designer Lite v1.2 (517-397) with the TSXCUSB485 (218-080) lead connected to USB port on PC/laptop and an XBTZ925 (218-084) adapter, or simply a XBTZ945 (493-3443) cable to via serial port on PC_x000D_ Schneider Electric Magelis XBT-N_x000D_ Magelis XBT-N compact display units are designed for use with Schneider Electric Twido, Nano, Micro and Premium PLCs They are used to display status messages, alarm (stock no. 493-3421) and maintenance information as well as process data. Various function keys can easily be configured to modify parameters, issue machine control (eg. START/STOP), or browse through text information menus and pages._x000D_ 2 fixed legend, service keys (ESC, ENTER), which are non configurable_x000D_ 2 fixed legend, left and right arrow keys, configurable as links to different pages or for machine control._x000D_ 4 configurable and legend customisable keys (two can be up and down arrows as shown below). The legends are changed by sliding a choice of legend strips behind the front membrane before panel installation. These four keys can be used to latch or toggle PLC bits, to call other pages, or to increment digits in a numerical value (rather like the function of a mechanical thumbwheel)_x000D_ All the Magelis XBT-N compact display units have the same ergonomic user interface as follows:_x000D_ Units are configured using Windows based XBT-L1001M software. The user application is built up in pages where each page can be designed, viewed, and simulated in its entirety.