LP1K0610BD3 Schneider Electric TeSys K LP1K Contactor, 24 V dc Coil, 3 Pole, 6 A, 2.2 kW, 3NO

Schneider Electric 3 Pole Contactors_x000D_ These contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, Schneider Electrics contactors can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts._x000D_ These contractors feature varied switching voltages, many of the range feature screw clamp or a solder termination._x000D_ • Highly reliable_x000D_ • Excellent quality_x000D_ • Easily installed accessories_x000D_ What does the utilisation category AC1 and AC3 mean for the TeSys contactors?_x000D_ Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions._x000D_ AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution._x000D_ AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units._x000D_ What accessories are available?_x000D_ • Auxiliary contact blocks with serrated wiping action_x000D_ • Front mount dust tight auxiliary contact blocks_x000D_ • Pneumatic time delay blocks_x000D_ • Transient voltage surge suppressors_x000D_ • Interface modules and electronic timers_x000D_ • Mechanical latching blocks_x000D_ Approvals_x000D_ CSA, UL, NEMKO, DEMKO, SEMKO, FIMKO_x000D_ Standards_x000D_ BS5424 Part 1/IEC 947, VDE 0660, NFC63 110_x000D_ LP1K0610BD3 TeSys K LP1K Contactor._x000D_ Motor control applications._x000D_ AC-3, AC-4 Category._x000D_ [Ie] rated operational current 6 A at <= 440 V AC AC-3 for power circuit._x000D_ Built-in bidirectional peak limiting diode suppressor_x000D_ [Ue] rated operational voltage Power circuit: 690 V AC 50/60 Hz, Signalling circuit: <= 690 V AC 50/60 Hz._x000D_ Control circuit voltage limits Operational: 0.8...1.15 Uc (at <50°C0), Drop-out: 0.1...0.75 Uc (at <50°C)._x000D_ 1 NO Auxiliary contact._x000D_ Category III._x000D_ Rated breaking capacity, 110 A at 415 V conforming to IEC 60947, 110 A at 440 V conforming to IEC 60947, 80 A at 500 V conforming to IEC 60947, 110 A at 220...230 V conforming to IEC 60947, 110 A at 380...400 V conforming to IEC 60947, 70 A at 660...690 V conforming to IEC 60947._x000D_ Flame resistant V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102._x000D_ Safety level B10d = 1369863 cycles contactor with nominal load conforming- to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming- to EN/ISO 13849-1._x000D_ Rail and Plate mounting._x000D_ Screw clamp terminals._x000D_ Approvals_x000D_ UL, CSA.