LC1K09105P7 Schneider Electric TeSys K LC1K Contactor, 230 V ac Coil, 3 Pole, 20 A, 4 kW, 3NO

Schneider Electric TeSys K LC1K Contactors._x000D_ Schneider Electric TeSys K provide you with a choice of reversing and non-reversing contactors. TeSys K contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, Schneider Electric contactors can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts._x000D_ The contractors feature varied switching voltages, many of the range feature screw clamp or a solder termination. TeSys K contactors offer you the best performance and compactness ratio plus also ensuring easy integration in all applications._x000D_ Highly reliable_x000D_ Excellent quality_x000D_ Easily installed accessories_x000D_ Contactor Features._x000D_ Common options available for all ratings: 6, 9, 12 A_x000D_ Control circuits available: AC, DC, low-consumption DC, silent_x000D_ Applications: 2.2 kW, 4.5 kW, 5.5 kW in AC3 and AC4_x000D_ Connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boards_x000D_ Control Relay Features._x000D_ 4 pole relays with 10A thermally rated contacts suitable for AC or DC control voltages. Low consumption coil versions with built in suppression and suitable to be used with programmable controllers are also available._x000D_ Contacts with 10A thermal rating, suitable for use down to 17V 5mA_x000D_ Four-pole for operation with AC or DC control circuits_x000D_ Variety of auxiliary contacts, and timer modules_x000D_ Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types available_x000D_ Applications._x000D_ Industry, infrastructure, building._x000D_ Simple control systems._x000D_ Noise sensitive areas, disturbed mains supply, silent contactor._x000D_ Compatible with programmable controller outputs, low consumption contactor._x000D_ Switching contactor or relay coils._x000D_ Powering control and signalling equipment._x000D_ What does the utilisation category AC1 and AC3 mean for the TeSys contactors?_x000D_ Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions._x000D_ AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution._x000D_ AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units._x000D_ What accessories are available?_x000D_ Auxiliary contact blocks with serrated wiping action_x000D_ Front mount dust tight auxiliary contact blocks_x000D_ Pneumatic time delay blocks_x000D_ Transient voltage surge suppressors_x000D_ Interface modules and electronic timers_x000D_ Mechanical latching blocks_x000D_ LC1K09105P7 TeSys K LC1K Contactor._x000D_ Motor control, Resistive load applications._x000D_ ACA-1, AC-3, AC-4 Category._x000D_ [Ie] rated operational current 9 A at <= 440 V AC AC-3 for power circuit, 20 A (<= 50 °C) at <= 440 V AC AC-1 for power circuit, 16 A (<= 70 °C) at 690 V AC AC-1 for power circuit._x000D_ Control circuit 230 V AC 50/60 Hz._x000D_ 1 NO Auxiliary contact._x000D_ Category III._x000D_ Rated breaking capacity, 110 A at 415 V conforming to IEC 60947, 110 A at 440 V conforming to IEC 60947, 80 A at 500 V conforming to IEC 60947, 110 A at 220...230 V conforming to IEC 60947, 110 A at 380...400 V conforming to IEC 60947, 70 A at 660...690 V conforming to IEC 60947._x000D_ Flame resistant V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102._x000D_ Safety level B10d = 1369863 cycles contactor with nominal load conforming- to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming- to EN/ISO 13849-1._x000D_ Approvals_x000D_ UL, CSA.