LEDS100-05-01 Moflash LEDS100 Series Amber Flashing Beacon, 85 → 280 V ac, 85 → 380 V dc, Surface Mount, LED Bulb, IP65

Moflash Industrial ECO LED Beacon - LEDS100 Series_x000D_ The LEDS100 economy series are suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing._x000D_ The ECO LEDS beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades._x000D_ This design allows for termination inside the enclosure through the base of the beacon, either from directly below or using a 6mm cabling channel at 90° to the base for surface cabling. The LEDS incorporates two mounting studs 2 x 5mm on 45mm centres._x000D_ Dual function, flashing or continuous (static) mode_x000D_ Continuously rated_x000D_ LED long life_x000D_ Low current consumption_x000D_ Suitable for surface, conduit box or wall mounting_x000D_ 2 stud fixing_x000D_ 360° light output around the vertical axis_x000D_ Dustproof and weatherproof_x000D_ UV stable polycarbonate lens_x000D_ UV stable ABS plastic base_x000D_ 160 flashes per minute (FPM)_x000D_ IP65 protection_x000D_ RoHS compliant_x000D_ CE Marked_x000D_ Moflash Amber LED Beacon, 40 to 380V DC, 85 to 285V AC - LEDS100 Series - LEDS100-05-01_x000D_ This Moflash LED (light-emitting diode) beacon is used to signal hazards in commercial and industrial work environments. The warning light has a 360° output along the vertical axis to make sure the warning signal is visible in all directions. The LED bulb is bright enough to be seen clearly in most lighting conditions for effective signalling. It's also energy-efficient thanks to its low current consumption of just 35mA. For versatility, the light can be set to a flashing or continuous mode via a jumper link on the PCB (printed circuit board)._x000D_ Features & Benefits_x000D_ • Broad operating temperature range of -25°C to +55°C for use in demanding environments_x000D_ • Polycarbonate (PC) lens material is impact-resistant and UV (ultraviolet) stable for use in harsh conditions_x000D_ • Wide supply voltage range of 40 to 380V DC (direct current) or 85 to 285V AC (alternating current) for use in most set-ups_x000D_ Applications_x000D_ • Maintenance equipment_x000D_ • Emergency service vehicles_x000D_ • Airport baggage claims_x000D_ • Manufacturing lines_x000D_ Is this beacon suitable for use in damp or dusty environments?_x000D_ The beacon has an IP65 (ingress protection) rating, so it's completely protected against dust and low-pressure water jets from all directions.