LEDA125-04-02 Moflash LEDA125 Series Red Buzzer Beacon, 230 V ac, IP65, Surface Mount, 90dB at 1 Metre

Compact LED Beacon / Buzzer Combination_x000D_ The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry._x000D_ Two signals in one_x000D_ 100000 hours life for LED_x000D_ Continuously rated_x000D_ 48 LED array ultra bright_x000D_ 360° visibility_x000D_ Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)_x000D_ 3 point fixing_x000D_ UV stable polycarbonate lens and ABS base_x000D_ IP65 protection_x000D_ RoHS compliant_x000D_ CE marking_x000D_ Note_x000D_ Piezos cannot be controlled independently from the light._x000D_ Moflash Red Buzzer Beacon, 230V AC, 90dB - LEDA125 Series - LEDA125-04-02_x000D_ Enhance safety in your workplace with this red buzzer beacon from Moflash. The LED (light-emitting diode) bulb rotates around the vertical axis to create a continuous flashing effect with a 360° reach for broad visibility. The buzzer emits an audible alert at the same time to provide an additional indicator of a hazard. It produces a volume of up to 90dB (decibels) at 1m, making it easy to hear at a distance. The base plate houses dual circuit boards for the buzzer and light that fit securely into the enclosure for protection against moisture and wear._x000D_ Features & Benefits_x000D_ • Wide operating temperature range of -20°C to +55°C for use in extreme industrial environments_x000D_ • Flame-retardant ABS (acrylonitrile butadiene styrene) housing material helps prevent the spread of flames in case of a fire_x000D_ • Polycarbonate lens material is resistant to UV (ultraviolet) rays for outdoor use_x000D_ • IP65 (ingress protection) rating means the unit can withstand exposure to low-pressure water jets and dust_x000D_ Applications_x000D_ • Factory assembly lines_x000D_ • Fire safety_x000D_ • Testing facilities_x000D_ How fast does this light flash?_x000D_ The light has three modes, so you can choose the most suitable mode for your application. There's a steady light, a standard flash at 60FPM (flashes per minute) and a rapid flash at 90FPM._x000D_ LED/Buzzer