SOLM/R/W/S Eaton Series Red Flashing Beacon, 9 → 60 V, Surface Mount, LED Bulb, IP54, IP65

LED Beacons - Solista Maxi_x000D_ An enhancement of the standard Solista. This LED beacon has an economy and a performance mode. In economy mode it can require as little as 3mA, or it can be switched to attain much higher light outputs where visibility is the greater concern. For even greater effectiveness a double flash sequence can be selected._x000D_ 3 user selectable output settings_x000D_ Wide operating voltage range_x000D_ Synchronisation flash_x000D_ Single or double flash_x000D_ Lockable bases_x000D_ Warning_x000D_ This product exceeds the requirements of En54-3 but is not designed to meet EN54-23. Where the Construction Product Directive or Regulation (CPD/CPR) is a country requirement, it cannot be used, legally, for the purpose of alerting room occupants to a Fire Alarm condition. For Countries where CPD/CPR does not apply, this note should be disregarded._x000D_ Supplied with_x000D_ Lens, base_x000D_ Eaton Fulleon Red LED Beacon, Surface Mount, 9 V DC to 60 V DC -Solista Maxi Series- SOLM/R/W/S_x000D_ Use this beacon from Eaton's Fulleon line to enhance workplace safety. Its bright red light immediately attracts attention, making it a useful supplement to an audible warning signal. It can stand alone or operate as part of a fire-alarm system._x000D_ Pick from a choice of three settings for economy, bright or flashing modes. Flash colours include red, amber and white for use in stopping, warning or starting signals. Use the light's lockable base to securely attach it to your chosen surface._x000D_ • Highly reliable for enhanced workplace safety_x000D_ • Versatile operating voltage range_x000D_ • Supplied as a complete, ready-to-use unit with lens cap and base_x000D_ • Long-lasting LED (light-emitting diode) bulb for improved efficiency_x000D_ • Compact unit with a shallow base and height of 53 mm_x000D_ How much current does this beacon use?_x000D_ The current the light draws depends on the function you choose. When it's set to economy mode, the beacon only uses 3 mA. When it's on the brightest setting, the light uses a maximum current of 15 mA._x000D_ Can I use this beacon in a factory setting?_x000D_ Yes. The beacon's base has an IP54 (ingress protection) rating for defence against dust and water splashes, making it suitable for use in demanding environments._x000D_ Note_x000D_ Eaton formerly known as Fulleon