003H2 Delta-Mobrey Gap Sensor Level Alarm Switch Level Switch, FET Output, Horizontal, Vertical, Polyphenylene Sulfide Body

Mobrey Ultrasonic Level Switch_x000D_ The Mobrey Integral ultrasonic level sensor switch is intended for level detection at a fixed point when liquid fills the gap between the crystals. It has polyphenylene sulphide construction and two open-drain FET transistors (one conducting when the sensor is wet and the other conducting when the sensor is dry) output type. This switch It has electric voltage ranging between 18VDC/AC and 30VDC/AC._x000D_ Note:_x000D_ If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled._x000D_ Features and Benefits_x000D_ Vessel pressure is 5bar (maximum)_x000D_ Wet switching level detection at a fixed point when liquid fills the gap between the crystals_x000D_ Switched voltage is 30VDC (maximum)_x000D_ Suitable for low maintenance applications_x000D_ High reliability with no moving parts_x000D_ Not easily subject to fouling and not affected by ambient light conditions_x000D_ Fitted with 3m cable_x000D_ Applications_x000D_ Low level alarms in header tanks_x000D_ Pump control duty in feeder tanks_x000D_ High and low alarms in storage tanks_x000D_ Level and pump control in storage tanks_x000D_ Small or thin wall tanks_x000D_ Bund level detection_x000D_ Steering gear oil