SSF67A25B300 Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch, Float, 1m Cable, NO/NC, 250V ac Max, 120V dc Max

Dual Position Stainless Steel Float Switch_x000D_ Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications._x000D_ Two Independent Switching Points_x000D_ Lower Float Make on Fall, and Upper Float Make on Rise_x000D_ Minimum Fluid SG: 0.80_x000D_ Switch Differential (each level) Nominal: 1mm_x000D_ Suitable for High and Low Level Alarm and Control Signal_x000D_ Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications_x000D_ Vertical Mounting, M16 x 2 Thread_x000D_ Temperature Range: -20 to +135°C_x000D_ Nitrile Gasket_x000D_ ’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications_x000D_ Note_x000D_ All ratings in tech. spec. table are for resistive loads only_x000D_ Warning_x000D_ The Cable entry point must NOT under any circumstances be submerged._x000D_ On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ On the vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Sensata Cynergy3 Float Switch, Dual Switching Levels, 10 Bar Maximum Pressure - SSF67 Series - SSF67A25B300_x000D_ Need a multipurpose solution for your liquid tank applications? Choose this versatile float switch from Sensata Cynergy3. Its twin-switch, single-float design means you can use it to alert you to high and low liquid levels for ease of monitoring. Thanks to its stainless steel body, this robust component is resistant to corrosion and wear. M16 threads and washers provide secure, leakproof mounting, helping to ensure accurate level sensing. You'll find this float switch used in applications from food and beverage production to the petrochemical industry._x000D_ • Cable length of 1m for a flexible connection between your control module and the power supply_x000D_ • Mounts at the top or bottom of the tank for use in setups with no side access_x000D_ • Compatible with fluids that have a minimum specific gravity of 0.8 for versatility_x000D_ • ETFE cable sheath withstands high temperatures for safety in harsh environments_x000D_ What temperatures is this dual-level float switch suitable for?_x000D_ This float switch has a wide process temperature range between -20°C and +135°C, so it's suitable for use in demanding applications._x000D_ Features and Benefits_x000D_ • Two Independent Switching Points_x000D_ • Maximum temperature 135 °C_x000D_ • Minimum Fluid SG(Specific Gravities): 0.80_x000D_ • Suitable for high and low level alarm and control signal_x000D_ • Manufactured in Stainless Steel 316L material_x000D_ Guide how to choose the correct float switch_x000D_ One of the most reliable, well-demonstrated technologies for fluid level detecting is float switch. This sort of switch involves a magnet contained inside a float, and also an attractive reed switch contained inside a settled housing. The movement of float, due to changing fluid level, will cause the reed change to work (for instance close or open) at specific level. This trusted and tried technology depends on a generally straightforward plan that offers long haul quality without the requirement for the client to calibrate a switch._x000D_ There are different methods available how to choose a float switch for particular application, here are the main factors to consider:_x000D_ Physical arrangement and style_x000D_ The choice of styles depends on the physical arrangement of the tank, availability of mounting positions and whether there is an access inside of the tank._x000D_ Fundamental styles are horizontal / side mounting and vertical mounting. Horizontal / side mounting has a fixed housing, which you can find on the wall of a tank and it has got a hinged float attached to the fixed housing. Vertical usually have a fixed vertical stem and that is installed at the top or bottom of the tank._x000D_ Material selection_x000D_ It is very important to choose a float switch that is made from right materials, which are compatible with the liquids and temperatures of the chosen application. While using incorrect material it can resolve in damaging of the component as well as failure of a float switch._x000D_ Material types:_x000D_ • Nylon – used for oils, diesel, organic chemicals and MEK (methylethylketon) based printing inks_x000D_ • Polypropylene (PP) – acids and alkali, detergents, oils, water, organic chemicals_x000D_ • Polyphenylene sulphide (PPS) – used for more aggressive chemicals, and higher temperatures, up to 120ºC_x000D_ • Stainless steel – medical and food industries, hydraulic fluids, chemicals, and environments with high temperatures up to 135ºC_x000D_ • Buna/Nitrophyl – diesel, oil, petrol and water (stationary applications)_x000D_ • D300 foam (PVC) – mostly for hydraulic oils and chemical solutions_x000D_ Electrical_x000D_ You need to fully understand what is the nature of the load that requires to be switched and make sure that the float switch is adequate for holding your load. The electrical ratings, which we provide in specifications are resistive loads._x000D_ Cables_x000D_ In areas where harsh liquids may spill onto external wiring, it is important to underline particular materials for the cables in connection to the float switches. You can either use standard, UL-approved cable types for the range of float switches, as well as high temperature, low smoke zero halogen (LSZL) and other specialised materials._x000D_ Is this the right switch for you?_x000D_ The SSF67A25B300 has been designed to give user a long reach float switch with a number of switching options, to cater for a wide variety of system requirements such as aggressive liquids, hygienic applications, petrochemical, storage and process control applications._x000D_ Remember!_x000D_ The cable entry point must NOT under any circumstances be submerged.