SSF67A25B225 Cynergy3 SSF67 Series Vertical Stainless Steel Float Switch, Float, 1m Cable, NO/NC, 250V ac Max, 120V dc Max

Dual Position Stainless Steel Float Switch_x000D_ Designed to give the user a number of switching options to cater for a variety of system requirements. These switches are most suited for use with aggressive liquids and hygienic applications._x000D_ Two Independent Switching Points_x000D_ Lower Float Make on Fall, and Upper Float Make on Rise_x000D_ Minimum Fluid SG: 0.80_x000D_ Switch Differential (each level) Nominal: 1mm_x000D_ Suitable for High and Low Level Alarm and Control Signal_x000D_ Stainless Steel 316L for Use with Aggressive Liquids, or in Hygienic Applications_x000D_ Vertical Mounting, M16 x 2 Thread_x000D_ Temperature Range: -20 to +135°C_x000D_ Nitrile Gasket_x000D_ ’Safe Area’ for Use in Petrochemical, Storage, and Process Control Applications_x000D_ Note_x000D_ All ratings in tech. spec. table are for resistive loads only_x000D_ Warning_x000D_ The Cable entry point must NOT under any circumstances be submerged._x000D_ On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ On the vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Sensata Cynergy3 Vertical Float Switch, 10 Bar, 600mA - SSF67 Series - SSF67A25B225_x000D_ Looking for a compact and accurate liquid level detection and control solution for your fluid systems? Choose this vertical float switch from Sensata Cynergy3. The device triggers the opening and closing of valves to ensure the liquids in your tank stay at an appropriate level. A stainless steel body makes this float switch durable and resistant to corrosion for reliable long-term performance. It can withstand process temperatures of up to +135°C, so it's a practical choice for use in applications involving hot liquids, such as boilers and tanks in the petrochemical industry._x000D_ Features & Benefits_x000D_ • Ample cable length of 1m for a flexible electrical connection_x000D_ • Maximum operating pressure of 10 bar for use in heavy-duty applications_x000D_ • ETFE (ethylene tetrafluoroethylene) cable sheath for resistance to heat and chemicals_x000D_ • Tinned copper conductors for a reliable connection_x000D_ • Maximum switching current of 600mA for energy-efficient operation_x000D_ What's the voltage rating of this float switch?_x000D_ This float switch has a voltage rating of 250V AC and 120V DC. This makes it a practical choice for low-power applications.