RSF88Y100R Cynergy3 RSF80 Series Horizontal External Polypropylene Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal External Float Switch, NO/NC, Polypropylene - RSF80 Series - RSF88Y100R_x000D_ If you need to measure, monitor or respond to liquid levels in your tanks, this Sensata Cynergy3 horizontal float switch is a reliable solution. It consists of a pivoting actuator with a magnet and a reed switch sensor that detects changes in magnetic fields. The actuator moves as the liquid level rises and falls, shifting the magnet and telling the sensor to open or close the switch. A switch like this one is commonly found in vending machines, evaporator units and commercial washing machines._x000D_ Features & Benefits_x000D_ • Designed for either NO (normally open) or NC (normally closed) operation for versatility_x000D_ • Made of tough PP (polypropylene) for durability and impact resistance_x000D_ Can I use this switch to monitor both cold and hot liquids?_x000D_ Yes, thanks to its wide operating temperature range of -20°C to +100°C, it's suitable for monitoring both cold and hot liquids._x000D_ How do I mount this switch?_x000D_ This switch is designed for external mounting, so there's no need to access the inside of the tank. It uses a 1/2-inch NPT (National Pipe Thread) connection for secure installation.