RSF86Y100R Cynergy3 RSF80 Series PCB Mount Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal Float Switch, Polyphenylene Sulfide, NO/NC - RSF80 Series - RSF86Y100R_x000D_ Need a float switch that's simple to install? Choose this option from Sensata Cynergy3 to monitor fluid levels. It's designed to be mounted through the wall of a tank using a 1/2-in NPT (National Pipe Thread) thread, without the need to access the inside of the tank. Thanks to polyphenylene sulphide construction with a Viton gasket, it's suitable for use with most organic and inorganic chemicals and oils. This makes it a good choice for use with diesel generators, hydraulic oil and gearbox oil levels. For added versatility, the switch can be set to the normally open (NO) or normally closed (NC) position by a simple 180º rotation._x000D_ Features and Benefits_x000D_ • Suitable for horizontal internal or external mounting for versatile installation_x000D_ • Broad operating temperature range of -10°C to +120°C for use in a range of demanding environments_x000D_ • Safe for use in food and vending applications_x000D_ What types of loads can this switch handle?_x000D_ The switch is designed for signal switching and for use with suppressed coil miniature relays and other resistive loads. It's not suitable for inductive or inrush loads.