RSF86H100R Cynergy3 RSF80 Series Horizontal External Polyphenylene Sulfide Float Switch, Float, 1m Cable, SPNO, 300V ac Max, 300V

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal External Float Switch, 1m Cable, SPNO - RSF80 Series - RSF86H100R_x000D_ This Sensata Cynergy3 float switch helps you to keep track of the liquid levels in an industrial container. It also helps you to prevent overflow when filling the container and to alert you when liquid levels are low. The float switch sits on top of the liquid and turns the circuit off when the liquid rises or falls. It's designed for external mounting to the side of a container, which is ideal for containers where there's no top or bottom access. You'll find this type of float switch used in commercial washing machines and vending machines._x000D_ Features & Benefits_x000D_ • Minimum fluid SG (specific gravity) of 0.85 to ensure the device remains afloat in low-density liquids_x000D_ • Wide operating temperature range of -10°C to +120°C for use in extreme heat or cold_x000D_ • Ample 1m cable length for a flexible connection_x000D_ • Polyphenylene sulfide (PPS) body material for resistance to wear and chemicals_x000D_ • Maximum current consumption of 600mA (milliamperes) to ensure energy-efficient operation_x000D_ At what depth will this float switch open and close in water?_x000D_ This float switch closes at a depth of 9mm and opens at a depth of 24mm.