RSF84YP Cynergy3 RSF80 Series Horizontal Polypropylene Float Switch, Float, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal Float Switch, NO/NC, M12 - RSF80 Series - RSF84YP_x000D_ When you need to monitor liquid levels closely, opt for this Sensata Cynergy3 float switch. It's on hand to gauge low or high liquid levels when filling up or emptying your tank. The floating component of the device lies on the liquid surface and causes the switch to change when it rises or falls. This sends a signal, alerting you of the change in your liquid level. As the switch mounts to the side of a tank, you can install it in containers with no vertical access._x000D_ Features & Benefits_x000D_ • Wide operating temperature of -20°C to +100°C for use in harsh environments_x000D_ • Strong polypropylene body material for lasting use_x000D_ • M12 standard mounting thread for compatibility with common fixtures_x000D_ • 'Normally open' (NO) or 'normally closed' (NC) switch output configuration options for versatility_x000D_ Where can I use this switch?_x000D_ This type of float switch is commonly used in water pumps. It's an easy way to control the level of groundwater, wastewater or sewage, preventing hazardous overspills. You can also use it for fluid transfer pumps at waterworks and as a high-water alarm to protect liquids in your systems from reaching dangerous levels.