RSF78Y100RN Cynergy3 RSF70 Series Horizontal External Polypropylene Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal External Float Switch, 1m, NO/NC - RSF70 Series - RSF78Y100RN_x000D_ Protect your container from overflow hazards using this float switch from Sensata Cynergy3. The floating component sits on the liquid surface and magnetically flicks the switch when levels rise or fall to help you keep liquid levels at an appropriate level. It's made of a durable polypropylene (PP) material for resistance to wear and chemicals, making it a good choice for use in demanding applications. This horizontal switch mounts externally on the side of your tank, making it ideal for tanks with no top or bottom access. Use it for equipment such as vending machines or evaporator units._x000D_ Features & Benefits_x000D_ • Switch action is reversible by rotating the switch for greater versatility_x000D_ • Broad operating temperature range of -20°C to +100°C for use in extreme conditions_x000D_ • Ample cable length of 1m ensures the switch has extended reach inside the tank_x000D_ Is this switch susceptible to leaks?_x000D_ No, the switch connection is protected by a gasket ring fitted between the components. Its nitrile rubber (NBR) material is highly resistant to liquid to prevent its sealing properties from wearing down. This material also has a high level of strength, so it can withstand pressure build-ups without loosening its hold on the seal.