RSF77Y100GV/RS Cynergy3 RSF70 Series Horizontal Polyvinylidene Fluoride Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switch - Compression Seal_x000D_ Cynergy3 horizontal float switches are compact in size and available in a range of materials and gasket choices to suit a broad range of applications. Horizontal level switches offer long-term reliability from a simple and trusted design that requires no complex setup or calibration procedures. Switch function can be easily changed from normally open to normally closed by simply rotating through 180° during installation._x000D_ Features and Benefits_x000D_ • Compression seal fitting_x000D_ • Flying lead or M12 plug connection_x000D_ • 25VA or 100VA versions_x000D_ Applications_x000D_ Cynergy3 vertical float switches are suitable for a wide range of applications including_x000D_ • Vending machines_x000D_ • Commercial dishwashers_x000D_ • Auxiliary tanks on vehicles_x000D_ Sensata Cynergy3 Horizontal Float Switch, PVDF, 1m Cable - RSF70 Series - RSF77Y100GV/RS_x000D_ You can use this Sensata Cynergy3 float switch to monitor liquid levels in your tanks. It consists of a pivoting actuator with a magnet and a reed switch with a sensor. The actuator moves as the level rises and falls, causing changes in the electromagnetic field. The sensor responds to these changes, triggering the switch's contacts to open and close. This switch is designed for mounting on the outside of a tank for situations where you don't have access to the inside of the tank. Its Viton gasket is resistant to chemicals and wear, providing a long-lasting seal to prevent leaks. A switch like this is commonly used to activate and deactivate pumps or alarms in sewage control and water treatment systems._x000D_ Features & Benefits_x000D_ • Wide operating temperature range of -10°C +105°C for use in demanding environments_x000D_ • PVDF (polyvinylidene fluoride) body material for durability and corrosion resistance_x000D_ Can I change the switch action?_x000D_ Yes, you can easily change the switch's function from normally open (NO) to normally closed (NC) by simply rotating it 180° during installation. This makes it a versatile choice.