RSF76Y050TV Cynergy3 RSF70 Series PCB Mount Polyphenylene Sulfide Float Switch, Float, 500mm Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal External Float Switch, NO/NC, 500 mm - RSF70 Series - RSF76Y050TV_x000D_ This Sensata Cynergy3 float switch is a simple and reliable way to monitor liquid levels in your system. It's designed to fit through a tank wall from the outside, so it's a good choice for less accessible containers. The switch is simple to install – just insert the switch into a 23 mm diameter hole in your tank, then use the compression seal and backnut to secure it in place. To make it a versatile choice, this switch is suitable for use with most organic and inorganic chemicals and oils. You'll commonly find it used in vending machines, commercial washing machines and evaporator units._x000D_ Features and Benefits_x000D_ • Polyphenylene sulfide body and silicone and Viton gasket for use in challenging chemical applications_x000D_ • Broad operating temperature range of -10°C to +120°C for use in demanding conditions_x000D_ • Simple rotation of 180° to set the switch action to normally open (NO) or normally closed (NC) operation_x000D_ How does this float switch work?_x000D_ This switch combines a reed switch with a pivoted magnet on a float. The magnet causes the reed switch to close or open at a specific fluid level.