RSF73Y050QM Cynergy3 RSF70 Series Cable Mount Nylon Float Switch, Float, 500mm Cable, Direct Load, 240V ac Max, 120V dc Max

Cynergy3 Horizontal Float Switches_x000D_ Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards._x000D_ WRAS approval explained_x000D_ WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard._x000D_ What materials can you choose from?_x000D_ • Nylon_x000D_ • Polypropylene_x000D_ • Polypropylene Sulfide (PPS)_x000D_ Features and Benefits_x000D_ • Operating temperature: -10 °C to +120 °C_x000D_ • N/O or N/C Switch output_x000D_ • Switch action may be reversed by rotating the switch through 180º_x000D_ • Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile_x000D_ • Flying Lead_x000D_ • M12 plug connection_x000D_ • Internal & external fitting inside a tank_x000D_ • UL recognised_x000D_ Typical Applications_x000D_ These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units._x000D_ Note_x000D_ Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads._x000D_ Sensata Cynergy3 Horizontal External Float Switch, Direct Load, 500 mm - RSF70 Series - RSF73Y050QM_x000D_ Avoid the hazard of potential overflow from your tank with this float switch from Sensata. It's a simple yet highly reliable way to detect liquid levels in your system._x000D_ This versatile component can be used as an alarm or indicator, or to control a pump. It keeps the level of water in your tank between a must-close level of 7 mm and a must-open level of 20 mm. It's a dependable choice for applications that need a repeatable signal to indicate when fluid has reached a pre-determined level._x000D_ Features and Benefits_x000D_ • Convenient external compression-seal fitting for applications where access to the tank interior is restricted_x000D_ • Lightweight nylon body with excellent abrasion resistance_x000D_ • Wide operating temperature range of -20°C to +75°C for use in a variety of environments_x000D_ How does a float switch work?_x000D_ A float switch is most commonly used in a tank to maintain the minimum and maximum liquid levels. When the fluid level reaches a minimum level, the switch signals a pump to operate and replenish the tank. When the maximum liquid level is reached, the switch tells the pump to stop working. This means the fluid in the tank stays within the pre-set range.