RSF66A50A150 Cynergy3 RSF66 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, Direct Load, 240V ac Max, 120V dc

Cynergy3 RSF66 Double Float Switches_x000D_ The Cynergy3 RSF66 dual switch point series are float switches for high and low level switching. The RSF66 float switches are made using Polyphenylene Sulphide (PPS) in grey, which is ideal for a wide range of different liquids. This makes the RSF66 range versatile for different applications._x000D_ Dual float switches can be used to control filling or emptying tanks with electromechanical relays._x000D_ What length cable do they come with?_x000D_ The RSF66 series comes with a 1m standard cable length with flying lead. It is a four core PVC cable._x000D_ What temperature can they withstand?_x000D_ -10°C to +85°C / +14°F to +185°F_x000D_ What is their power capacity?_x000D_ RSF66 float switches have a power capacity of 25VA._x000D_ Approvals:_x000D_ WRAS, UL and NSF approved_x000D_ Versions Available (including upper/lower switch levels):_x000D_ (446-2597) RSF66B50B150 - Double 50/150mm Filling Control_x000D_ (446-2581) RSF66B50B100 - Double 50/100mm Filling Control_x000D_ (446-2575) RSF66A50A150 - Double 50/150mm Emptying Control_x000D_ (446-2569) RSF66A50A100 - Double 50/100mm Emptying Control_x000D_ (348-7983) RSF66A25B75 - Single 30/75mm_x000D_ (348-7999) RSF66A25B100 - Single 30/100mm_x000D_ (348-8009) RSF66A25B125 - Single 30/125mm_x000D_ (348-8015) RSF66A25B150 - Single 30/150mm_x000D_ (348-8021) RSF66A25B175 - Single 30/175mm_x000D_ Warning_x000D_ The Cable entry point must NOT under any circumstances be submerged:_x000D_ – On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ – On the vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Approvals_x000D_ UL recognised_x000D_ Sensata Cynergy3 Vertical Float Switch, 2NO, 1m - RSF66 Series - RSF66A50A150_x000D_ Choose this Sensata Cynergy3 dual float switch to keep your system's liquid levels within pre-set high and low limits. You can use it to control the emptying of tanks via electromechanical relays. The switch is made from durable and robust PPS (polyphenylene sulphide) which is compatible with a wide range of liquids, including inorganic and organic chemicals, oils and water. The device comes supplied with a four-core PVC cable, and you can mount it vertically on the top or bottom of your tank, so it's ideal for use when there's no side access._x000D_ Features & Benefits_x000D_ • Wide operating temperature range of -10°C to +85°C for use in challenging environments_x000D_ • 1m standard cable length with flying lead for flexibility_x000D_ • Nitrile rubber gasket for resistance to corrosion and abrasion_x000D_ How do I know when liquid levels are too high or low?_x000D_ This device has an internal magnet that'll move in relation to the reed switch as liquid levels change. When the liquid reaches a specified level, the magnet will trigger the switch, which can then activate an alarm.