RSF56H100R1/8 Cynergy3 RSF50 Series Vertical Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 300V ac Max, 300V dc Max

Cynergy3 RSF50 Series Float Switches_x000D_ Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch._x000D_ There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids._x000D_ The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem._x000D_ Within the series there are 5 ranges:_x000D_ RSF53 (black) - Nylon_x000D_ RSF54 (opaque) - Polypropylene (WRAS approved)_x000D_ RSF56 (grey) - Polyphenylene Sulphide (PPS)_x000D_ RSF57 (green) - Polyvinylidene Fluoride (PVDF)_x000D_ RSF58 (white) - Polypropylene (UL approved)_x000D_ Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications._x000D_ What contact types are there?_x000D_ The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation._x000D_ What mounting thread does it have?_x000D_ RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT._x000D_ Note_x000D_ Part numbers ending in '1/8' have a 1/8"NPT mounting thread_x000D_ Part numbers ending in 'C' have an M12 mounting thread_x000D_ Warning_x000D_ The cable entry point must NOT under any circumstances be submerged._x000D_ On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Supplied with_x000D_ epoxy sealed leadouts_x000D_ Sensata Cynergy3 Vertical Float Switch, NO/NC, 1m Cable - RSF50 Series - SF56H100R1/8_x000D_ Choose this float switch from Sensata Cynergy3 for monitoring liquid levels in your tanks and other large vessels. It's designed for vertical mounting through a hole in the top or bottom of the inside of your tank. You can reverse the switch action by simply inverting it through 180°, making it a versatile component. It's suitable for applications such as vending machines, industrial printing systems and chemical dosing equipment._x000D_ Features & Benefits_x000D_ • Wide operating temperature range of -10°C to +105°C for use in demanding environments_x000D_ • Made of polyphenylene sulfide (PPS) material for chemical and abrasion resistance_x000D_ • High maximum voltage rating of 300V for use in high-power applications_x000D_ • Ample cable length of 1m for a flexible connection_x000D_ • 1/8-inch NPT (National Pipe Thread) connection for a secure and simple attachment_x000D_ How does this switch work?_x000D_ This switch's actuator has an in-built magnet that causes changes in the magnetic field as it moves up and down with the water level. The contacts open and close when the switch's sensor responds to the change in magnetism.