RSF53Y100JC Cynergy3 RSF50 Series PCB Mount Nylon Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V dc Max

Cynergy3 RSF50 Series Float Switches_x000D_ Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch._x000D_ There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids._x000D_ The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem._x000D_ Within the series there are 5 ranges:_x000D_ RSF53 (black) - Nylon_x000D_ RSF54 (opaque) - Polypropylene (WRAS approved)_x000D_ RSF56 (grey) - Polyphenylene Sulphide (PPS)_x000D_ RSF57 (green) - Polyvinylidene Fluoride (PVDF)_x000D_ RSF58 (white) - Polypropylene (UL approved)_x000D_ Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications._x000D_ What contact types are there?_x000D_ The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation._x000D_ What mounting thread does it have?_x000D_ RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT._x000D_ Note_x000D_ Part numbers ending in '1/8' have a 1/8"NPT mounting thread_x000D_ Part numbers ending in 'C' have an M12 mounting thread_x000D_ Warning_x000D_ The cable entry point must NOT under any circumstances be submerged._x000D_ On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Supplied with_x000D_ epoxy sealed leadouts_x000D_ Sensata Cynergy3 Vertical Float Switch, NO/NC, 1 m - RSF50 Series - RSF53Y100JC_x000D_ Choose this compact float switch from Sensata when you need to precisely monitor liquid levels. It's a vertical switch, so you can mount it on the top or at the bottom of a container, making it an ideal solution when there's no side access to a tank._x000D_ It has NO (normally open) or NC (normally closed) options for flexibility in the layout of your electrical circuit. As this component is made from chemical-resistant nylon, you can use it with a wide range of substances, including oils, organic chemicals and printing inks._x000D_ Features and Benefits_x000D_ • Nitrile rubber gasket for resistance to corrosion and abrasion_x000D_ • Supplied with epoxy-sealed lead-outs for easy connection_x000D_ • Wide operating temperature range of -20°C to +75°C for use in demanding environments_x000D_ • 1 m cable for flexible connection_x000D_ • Standard M12 mounting thread_x000D_ How does this switch open and close?_x000D_ A vertical float switch like this one has a magnet mounted inside the float, along with a reed switch in its body. The float fits around the stem and rises and falls with the level of the liquid. When the float nears the reed switch, the magnetic force causes the switch to open or close.