RSF53V100MC Cynergy3 RSF50 Series Vertical Nylon Float Switch, Float, 1m Cable, NO/NC

Cynergy3 RSF50 Series Float Switches_x000D_ Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch._x000D_ There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids._x000D_ The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem._x000D_ Within the series there are 5 ranges:_x000D_ RSF53 (black) - Nylon_x000D_ RSF54 (opaque) - Polypropylene (WRAS approved)_x000D_ RSF56 (grey) - Polyphenylene Sulphide (PPS)_x000D_ RSF57 (green) - Polyvinylidene Fluoride (PVDF)_x000D_ RSF58 (white) - Polypropylene (UL approved)_x000D_ Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications._x000D_ What contact types are there?_x000D_ The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation._x000D_ What mounting thread does it have?_x000D_ RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT._x000D_ Note_x000D_ Part numbers ending in '1/8' have a 1/8"NPT mounting thread_x000D_ Part numbers ending in 'C' have an M12 mounting thread_x000D_ Warning_x000D_ The cable entry point must NOT under any circumstances be submerged._x000D_ On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside._x000D_ On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid._x000D_ Supplied with_x000D_ epoxy sealed leadouts_x000D_ Sensata Cynergy3 Vertical Float Switch, NO/NC, 600mA - RSF50 Series - RSF53V100MC_x000D_ This compact Sensata Cynergy3 float switch allows for close monitoring of liquid levels in applications with limited space. It offers both NO (normally open) and NC (normally closed) switch outputs for flexible use in liquid-level monitoring, high-alarm operations and overfill shutoffs. Thanks to its nylon construction, it's a durable choice that's resistant to corrosion and abrasion for use in harsh environments. The unit can be mounted vertically from the top or bottom of a tank's interior, so it's a good choice when you don't have access to the side of the tank. To ensure safe operation, keep the cable entry point dry by maintaining the mounting thread and cable entry above the liquid's highest level._x000D_ Features and Benefits_x000D_ • Nitrile gasket material for a tight seal and resistance to corrosion_x000D_ • Broad operating temperature range of -20°C to +75°C for use in challenging environments_x000D_ • Cable length of 1m for flexible connections_x000D_ How do you change the direction of the switch?_x000D_ For flexible use, it's simple to reverse the switch's direction. All you need to do is remove the float from the tank and invert the switch. Re-fit it to the stem and re-install it in the tank.