Работаем с юридическими лицами, бюджетными организациями, ИП
По вопросам приобретения товара пишите на info@west-cs.ru
Оплата по безналичному расчету согласно выставленному счету
Самовывоз - бесплатно, от 300руб. до пункта выдачи в Вашем городе, доставка от 500руб. "до двери"
100S-C, 3 Pole Safety Contactors 2N/O & 3N/C_x000D_ The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts._x000D_ Redundant contactors to isolate motor (hazardous motion)_x000D_ Positively guided main contacts_x000D_ Red contact housings for easy identification as safety device_x000D_ Protective cover prevents manual operation - yet the window allows visible ON/OFF status_x000D_ Note_x000D_ DC versions incorporate a diode protection circuit_x000D_ Allen Bradley 3-Pole Safety Contactor, 24V DC Coil, 43A - 100S-C43EJ22C_x000D_ Use this safety contactor from Rockwell Automation's Allen Bradley range for optimal protection in your feedback circuits. It has mechanically linked normally closed (NC) contacts that won't change state when a power pole welds. This prevents electric shocks, fire hazards and damage to your equipment. The contactor can function using both alternating current (AC) and direct current (DC) supply voltages for versatility. Its housing is colour-coded red as a clear indication it's a safety device. You'll find it used on emergency stop buttons and safety gates._x000D_ • 3-pole configuration for multi-circuit control• Wide operating temperature range of -25°C to +60°C for use in harsh environments• Protective cover prevents manual operation for enhanced safety• Light-emitting diode (LED) indicator clearly shows ON/OFF status_x000D_ Standards and Certifications_x000D_ • IEC 947-5-1 (International Electrotechnical Commission)• DIN 19240 (Deutsches Institut für Normung)_x000D_ What's the difference between a contactor and a safety contactor?_x000D_ A contactor is designed for basic switching controls – this means turning a motor on or off. A safety contactor, on the other hand, detects welds and prevents the normally open contacts from closing when a weld occurs on the normally closed contact. This prevents damage to the circuit and motor._x000D_ Safety Contactor
Наш менеджер свяжется с вами в ближайшее время