2TLA020054R0300 Tina 4A ABB Safety Controller

Vital Safety Controller, Base Unit_x000D_ The Vital safety device from ABB is the heart of a new solution which makes it possible to install/connect many different types of safety device in the same safety circuit and still achieve safety category 4 in accordance with EN 954-1/EN ISO 13849-1. The Vital module is based upon a dynamic single-channel concept as opposed to conventional dual-channel safety relays. ABB have designed this unit to accommodate up to 30 dynamic sensors within the safety circuit which can be supervised by one Vital module. The Vital unit can therefore replace several safety relays. Safety components with output contacts can be connected to the Vital via low cost Tina adaptors. The Vital also has automatically or manually supervised reset selection, dual safety outputs, and an information output for reset indication and status information for PLC's._x000D_ Cost-effective cable routing/connections_x000D_ Information output with two functions_x000D_ LED indication of: power supply, dynamic signal and outputs_x000D_ Detachable connector blocks_x000D_ Two NO safety outputs_x000D_ Manually supervised or automatic reset_x000D_ Can accommodate long cable lengths_x000D_ Standard width: 22.5 mm_x000D_ IP40 protection class rating_x000D_ A mechanical life of >107 operations_x000D_ Safety category 4, according to EN 954-1/EN ISO 13849-1 dynamic safety circuit_x000D_ Note_x000D_ Unused ports on the Tina 4A and 8A must be blanked by using a Tina 1A blanking plug._x000D_ Approvals_x000D_ UL, CSA_x000D_ Standards_x000D_ European Machinery Directive 2006/42/EC_x000D_ EN ISO 12100-1, EN ISO 12100-2,_x000D_ EN 60204-1, EN 954-1, EN ISO 13849-1,_x000D_ EN 62061